أخبارنا    |     بحث    |     خريطة الموقع    
.

   
آلات قص بالسلك المهدور خمسة محاور
     

ITEM

   CW-10 CW-30 CW-40 CW-50 CW-70
Machining method   Submerge/Flushing Flushing
Max. workpiece siz (WXDXH) mm 680X420X150 780x500x250 880X500X250 1000X690X300 1200x790x300
Max. Workpiece weight kg 250 500 550 800 1000
X`Y axes travel mm 300X200 400x300 500X300 600X400 800x500
Z axis travel  mm 150 250 250 300 300
U`V axes travel mm
30X    30
50x   50
50 X   50
60 X   60
60x    60
X-Y axis feed rate mm/min Max.900
Best surface roughness  u/m Ra 0.65
Machining speed (SKD-11.60mm) mm2/min 200
Drive motor (X`Y`U`V`)   AC Servo motor
Wire diameter (standard) mm 0.25 ( 0.15-0.3)
Wire feeding speed m/min 0-15
Wire tension  gf 200-2500
Max. taper angle degree ±15o /80
Max. wire bobbin weight kg 6 6 6 10 10
Outside dimensions(WxDxH) mm (S)850X573X375(F)920X573X400 (s)970x719x510 (F) 1040X719X450 (S)1070X719X480 (F)1140X719X450 (F)1136X900X530 (S)1272X862X480 1492x972x480
Machine weight kg 1500 2200 2400 2800 4100
  Previous || Next