أخبارنا    |     بحث    |     خريطة الموقع    
.

SW-E آلات توفير الطاقة مع محرك سيرفو
     
Table 1
MODEL UNIT Servo 90E Servo 120E Servo 150E Servo 190E
International Size Indication   326 326 435 435 614 614 760
Injection Unit Screw Diameter mm 32 36 40 32 36 40 36 40 45 40 45 50
Injection Pressure kg/cm2 2297 1815 1470 2297 1815 2177 1763 2177 1763 2166 1711 2166 1711 1948 1578
Theoretical Shot Volume cm3 145 183 226 145 183 204 251 204 251 289 366 289 366 398 491
Shot Weight (ps) gram 122 154 190 122 154 171 211 171 211 243 307 243 307 334 412
Injection Rate Cm3/sec 81 103 127 81 103 86 106 137 169 138 175 138 175 153 189
Injection Stroke mm 180 180 200 200 230 230 250
Injection Speed mm/sec 101 101 84 135 110 110 96
Theoretical Screw Rotation rpm 0~200 0~200 0~200 0~200 0~180 0~180 0~180
Clamping Unit Clamping Force ton 90 120 150 190
Mould Opening Stroke mm 330 380 430 480
Space Between Tie Bars mm 360X360 395X395 425X425 470X470
Platen dimensions mm 540X540 595X595 660X660 720X720
H X V
Mould Height mm 130~400 140~440 150~500 160~540
Min. - Max.
Ejector Stroke mm 100 100 140 140
Ejector Force ton 4.6 4.6 5.4 5.4
Other Pump Motor Power KW 11 11 13 13
Heating Capacity KW 4.6 4.6 6.1 6.1 7.9 7.9 11.5
Oil Tank Capacity L 120 120 190 190
Thermo Controller set (0-399) X 3 (0-399)X3 (0-399)X4 (0-399)X4 (0-399)X4
Machine Dimensions m 4.09X0.88X1. 52 4.6X0.93X1.54 5.01X1.01X1.63 5.56X1.07X1.69
(L X W X H)
Machine Weight ton 3.6 4.5 5.5 7.2
Table 2
MODELS UNIT Servo 230E Servo 270E Servo 320E
International Size Indication   760 958 958 1423 1423 1703
Injection Unit Screw Diameter mm 45 50 55 50 55 60 55 60 65
Injection Pressure kg/cm2 1948 1578 1844 1524 1844 1524 2036 1711 2036 1711 1919 1635
Theoretical Shot Volume cm3 398 491 530 641 530 641 713 848 713 848 905 1062
Shot Weight (ps) grams 334 412 445 539 445 539 599 713 599 713 760 892
Injection Rate Cm3/sec 192 237 202 245 263 318 238 284 238 284 253 297
Injection Stroke mm 250 270 270 300 300 320
Injection Speed mm/sec 120 103 134 100 100 89
Theoretical Screw Rotation rpm 0~180 0~170 0~170 0~160 0~160 0~150
Clamping Unit Clamping Force ton 230 270 320
Mould Opening Stroke mm 525 570 620
Space Between Tie Bars mm 515X515 555X555 620X620
Platen dimensions mm 790X790 850X850 930X930
H X V
Mould Height mm 180~580 200~610 220~670
Min. - Max.
Ejector Stroke mm 170 170 190
Ejector Force ton 6.2 6.2 7
Other Pump Motor Power KW 22.0(11+11) 24.0(11+13) 24.0(11+13)
Heating Capacity KW 11.5 13.7 13.7 17.4 17.4 19.8
Oil Tank Capacity L 240 310 310
Thermo Controller set (0-399)X4 (0-399)X5 (0-399)X5 (0-399)X5
Machine Dimensions m 5.95X1.18X1.86 6.47x1.24x1.92 6.96X1.32X2.0
(L X W X H)
Machine Weight ton 8.8 10.6 12.4
  Previous || Next