أخبارنا    |     بحث    |     خريطة الموقع    
.

SW-MB إغلاق هيدروليكي

Clik here to enlarge
 
Table 1
MODEL UNIT SW - 400 MB SW - 500 MB SW - 600 MB SW - 850 MB
Injection Unit Screw diameter mm 65 70 75 70 75 80 80 85 90 90 95 100
Injection pressure kg/cm2 1850 1595 1389 1998 1740 1529 2083 1845 1645 1815 1629 1470
Theoretical shot volume cm3 1128 1308 1502 1462 1679 1910 2187 2468 2767 2926 3261 3613
Shot weight (ps) grams 948 1099 1262 1228 1410 1604 1837 2073 2325 2458 2739 3035
0Z 33.4 38.7 44.4 43.3 49.7 56.5 64.7 73 81.9 86.6 96.4 107
Injection rate Cm3/sec 288 334 383 282 323 368 389 439 492 520 579 642
Plasticizing capacity (ps) kg/hr 154 179 205 179 205 234 234 264 296 296 329 365
Injection Stroke mm 340 380 435 460
Clamping Unit Clamping force tons 400 500 600 850
Max.opening space mm 1750-950 2000-1100 2100-1150 2300-1300
Space between tie bars mm 700X700 780X780 880X880 1000X1000
Mould Height mm 250 ~ 800 250 ~ 900 300 ~ 950 300 ~ 1000
min.-max.
Ejector Force tons 7 7.9 11 13.3
Ejector Stroke mm 190 200 250 250
Platen dimensions mm 1000X1000 1200X1200 1420X1420 1540X1540
(H x V)
Suggested min mold diameter (HxV) mm 400X400 470X470 530X530 600X600
Mould opening stroke mm 1500 1750 1800 2000
Other Pump driving motor HP/kw 70/52.22 70/52.22 90/67.14 100/74.6
Heating capacity kw 22.8 28.4 33.4 37
Thermo controller set (0 ~399) ~ 5 (0 ~399) ~ 6 (0 ~399) ~ 6 (0 ~399) ~ 6
Oil Tank Capacity L 1000 1000 1300 1300
Machine dimensions m 6.9x1.6x2.1 7.7x1.8x2.1 9.0X2.3X2.3 9.7X2.5X2.6
(L x W x H)
Machine weight ton 17 25 29 38
Table 2
MODEL UNIT SW - 1050MB SW - 1450 MB SW - 1850 MB SW - 2300 MB
Injection Unit Screw Diameter mm 100 105 110 110 115 120 130 140 150 150 160 170
Injection Pressure kg/cm2 2181 1978 1803 2129 1948 1789 1723 1486 1294 1588 1396 1236
Theoretical Shot Volume cm3 4163 4589 5037 5322 5817 6333 8628 10006 11486 14137 16085 18158
Shot Weight (ps) grams 3497 3855 4231 4470 4886 5320 7247 8405 9649 11875 13511 15253
0Z 123 136 149 157 172 187 255 296 339.7 418.1 475.8 537.1
Injection rate cm3/sec 603 665 730 776 848 923 1008 1168 1341 1322 1505 1699
Plasticizing capacity (ps) kg/hr 365 402 442 442 483 526 617 715 821 821 934 1055
Injection Stroke   530 560 650 800
Clamping Unit Clamping Force ton 1050 1450 1850 2300
Max.opening space mm 2750-1500 2860-1560 3100-1700 3450-1850
Space between tie bars mm 1100X1100 1300X1300 1600X1600 1800X1800
Mould Height mm 400 ~ 1250 400 ~ 1300 650 ~ 1400 650~1600
min.-max.
Ejector Force tons 15.8 18.6 24.7 31.8
Ejector Stroke mm  330 330 350 350
Platen Dimensions mm 1660X1660 1930X1930 2300X2300 2550X2550
(H x V)
Suggested min mold diameter (HxV) mm 660X660 780X780 960X960 1100X1100
Mould Opening Stroke mm 2350 2460 2450 2800
Other Pump driving motor HP/kw 140/104.44 175/130.55 200/149.2 250/186.5
Heating Capacity kw 45 55 70 95
Thermo Controller set (0 ~399) ~ 7 (0 ~399) ~7 (0 ~399) ~7 (0~399) ~7
Oil Tank Capacity L 1400 1700 2500 3000
Machine Dimensions m 11.4x2.9x2.8 12.2X3.2X3.2 14.5X3.5X3.6 15.7X3.8X3.8
(L x W x H)
Machine Weight ton 50 65 80 93
    Preview || Next