News*    |     Search    |     Site-Map    
.

   
Conventional Milling Machines
     
MODEL FM-180E FM-185L FM-240 FM-280 FM-320
TABLE
Working surface 1270x250 mm(50"x10")                  or 1370x250 mm (54"x10") (opt.) 1470x305mm (57-7/8"x12") 1470x380mm(57-7/8"x14-7/8") 1702x410 mm (67"x16-1/8") ( or 1702x510mm (67"x20-1/16"), opt.) 1900x410mm (74-13/16"x16-1/8") ( or 1900x510mm (74-13/16"x20-1/16"),opt.)
T-slots (size x number x pitch) 16mm x3x70mm (0.630"x3x2.755") 16mmx3x63 mm  (0.630"x3x2.480") 16mmx3x75 mm  (0.630"x3x2.953") 18mmx4x70 mm  (0.708"x4x2.755")
Max. table load 500kgs (1105 lbs) 600kgs (1326 lbs) 1000kgs (2210 lbs) 1200kgs (2652 lbs) 1500kgs (3315 lbs)
TRAVEL 
Longitudinal travel (X axis)  690mm (27-1/8"),W/P.f.   Or    900mm (35-3/8")  W/P .f. (opt.) 1040 mm (40-7/8") 1200 mm (47") 1400 mm (55") 1600 mm (63")
Cross travel (Y axis) 540mm (21-1/4") 500mm (20") 600mm (23-5/8") 650mm (25-5/8")
Vertical travel (Z  axis) 500mm (19-5/8"), w/p.u./d. 560mm (22-1/16") 630mm (24-3/4") 700mm (27-5/8")
Distance from spindle end to table 100-600mm (3-7/8"~23-5/8"),w/p.u./d. 45-605mm (1-3/4"~23-13/16") 140-770mm (5-1/2"~30-1/4") 100-800mm (3-7/8"~31-1/2")
Distance from spindle center to column 565mm (22-1/4") 490mm (19-1/4") 650mm (25-5/8")
SPINDLE
Spindle nose taper NT 40 NT 40
Spindle  speeds Mechanical operated or inverter operated (opt.) vari 50~3600 r.p.m :High/Low gear Inverter operated vari 50~3600 r.p.m : High/Low gear  Inverter operated vari 85~3600 r.p.m : High/Low gear 
Quill travel 127mm (5") 120mm (4-3/4") 140mm (5-1/2") 140mm (5-1/2")
Quill dia. 105mm (4-1/8") 110mm(4-5/16") 110mm (4-5/16")
Quill feeds per revolution of spindle 0.04, 0.08, 0,14mm/rev.    (0.0015",0.0030",0.005") 0.035, 0.07, 0.14mm/rev. 0.035,0.07, 0.14mm/rev.
Swiveling angle of head (R&L) 45o 45o
FEED
Cutting feed rate Power feed, 20~800mm/min.(X,Y axes) Vari,25~1200mm/min. (X,Y&Z (opt.) axes) Vari,25~1200mm/min. (X,Y & Z  axes) Vari,10~3000mm/min. (X,Y & Z  axes)
Rapid traverse Power feed, 1000mm/min.(X,Y axes) 2000mm/min.(X,Y & Z (opt.)axes) 2000mm/min.(X,Y & Z axes) 4800mm/min.(X,Y & Z axes)
MOTOR
Spindle drive motor 5 HP 5HP or 7-1/2 HP (opt.) 7-1/2 HP 7-1/2 HP
X, Y axes motor Power feed, 650in-lb Inverter operated 1/2 HP reduction gear motor DC SERVO 4.5Nm
Zaxes motor 1/2 HP (Power up/down) 1/2 HP (Power up/down) or inverter operated , 1/2 HP reduction gear motor (opt.) inverter operated , 1/2 HP reduction gear motor DC SERVO 4.5Nm
Coolant pump  1/8HP 1/6 HP 1/6 HP
DIMENSION
Machine size 1600x1800x2400mm (63"x31-1/2"x94-7/16") 1750x2430x2520mm (68"x7/8"x95-5/8"x99-3/16") 2050x2250x2100mm (60"x11/16"x88-9/16"x82-5/8") 2280x2120x2520mm (89"x3/4"x83-7/16"x99-3/16") 2390x2240x2520mm (94"x88-3/16"x99-3/16")
Machine weight 2000kgs (4420 lbs) 2350kgs (5170 lbs) 3100kgs 6944 lbs) 3800kgs ( 8398 lbs) 4000kgs (8840 lbs)
  Previous || Next