News*    |     Search    |     Site-Map    
.

   

SW-B Series Plastic Injection Molding Machines (Toggle Clamping)

     
Table 1
MODEL UNIT SW-90B SW-120B SW-150B SW-190B SW-230B SW-270B
Injection Unit Screw diameter mm 32 36 40 36 40 45 40 45 50 45 50 55 50 55 60 55 60 65
Injection pressure kg/cm2 2297 1815 1470 2177 1763 1393 2166 1711 1386 1948 1578 1304 1844 1524 1281 2036 1711 1458
Theoretical shot volume cm3 145 183 226 204 251 318 289 366 452 398 491 594 530 641 763 713 848 995
Shot weight (ps) grams 122 154 190 171 211 267 243 307 379 334 412 499 445 539 641 599 713 836
Injection rate Cm3/sec 65 82 101 84 103 131 98 124 154 135 167 202 176 213 254 186 221 259
Plasticizing capacity (ps) kg/hr 37 47 58 47 58 74 58 74 91 74 91 110 91 110 131 110 131 154
Screw Speed rpm 0-200 0-190 0_150 0~150 0-170 0-160
Injection Stroke mm 180 200 230 250 270 300
Clamping Unit Clamping force tons 90 120 150 190 230 270
Mould opening stroke mm 330 380 430 480 525 570
Space between tie bars mm 360x360 395x395 425X425 470X470 515x515 555x555
Platen dimensions mm 540x540 595x595 660X660 720X720 790x790 850x850
H x V
Mould height mm 130-400 140-440 150_500 160~540 180-580 200_610
min.-max.
Ejector Stroke mm 100 100 140 140 170 170
Ejector Force ton 4.6 4.6 5.4 5.4 6.2 6.2
( tons)
Other Pump driving motor HP/kw 15/11.19 20/14.92 25H P/18.65KW 30/22.38 30/22.38 40/29.84
Heating capacity kw 4.6 6.1 7.9 11.5 13.7 17.4
Thermo controller set (0-399) ~ 3 (0-399) ~ 4 (0_399)X4 (0~399)~4 (0-399) ~ 5 (0-399) ~ 5
Oil Tank Capacity U.S. gal 290 350 410 440 580 740
Machine dimensions m 4.3x1.25x1.6 4.8x1.3x1.65 5.2X1.35X1.7 5.6X1.4X1.75 6x1.5x1.8 6.5x1.6x1.9
(L x W x H)
Machine weight tons 3.6 4.5 5.5 7.2 8.8 10.6
Table 2
MODEL UNIT SW-320B SW-370B SW-470B SW-570B    SW-700B
Injection Unit Screw Diameter mm 60 65 70 65 70 75 70 75 80 80 85 90 90 95 100
Injection Pressure kg/cm2 1919 1635 1410 1850 1595 1389 1998 1740 1529 2083 1845 1645 1815 1629 1470
Theoretical Shot Volume cm3 905 1062 1232 1128 1308 1502 1462 1679 1910 2187 2468 2767 2926 3261 3613
Shot Weight (ps) grams 760 892 1034 948 1099 1262 1228 1410 1604 1837 2073 2325 2458 2739 3035
Injection rate cm3/sec 232 272 316 288 334 383 282 323 368 389 439 492 520 579 642
Plasticizing capacity (ps) kg/hr 131 154 179 154 179 205 179 205 234 234 264 296 296 329 365
Screw Speed rpm 0-150 0-150 0-140 0-130 0-110
Injection Stroke   320 340 380 435 460
Clamping Unit Clamping Force ton 320 370 470 570 700
Mould Opening Stroke mm 620 670 770 860 980
Space between tie bars mm 620x620 700X680 770X 742 860x800 960x860
Platen Dimensions mm 930x930 1030X1010 1130X1103 1280x1260 1370x1290
H x V
Mould eight mm 220-670 250-750 250-850 300-900 350-1000
min.-max.
Ejector Stroke mm 190 190 200 250 250
Ejector Force ton 7 7 7.9 11 13.3
( tons)
Other Pump driving motor HP/kw 50/37.3 60H P/44.76KW 60H P/44.76KW 80/59.68 90/67.14
Heating Capacity kw 19.8 22.8 28.4 33.4 37
Thermo Controller set (0-399) ~ 5 (0_399)~5 (0_399)~6 (0-399) ~ 6 (0-399) ~ 7 
Oil Tank Capacity U.S. gal 900 930 950 1100 1300
Machine Dimensions m 7x1.7x2 7.8X1.85X22 8.6X2X2.4 9.5x2.2x2.6 10.5x2.4x2.8
(L x W x H)
Machine Weight tons 12.4 17 22 29 38
  Previous || Next